An automated shrink wrapping machine is a packaging system that automatically receives products from a conveyor or production line. It then covers the product with shrink film, seals the film and sends the pack through a heat tunnel.
As the pack travels through the tunnel, heat makes the film contract around it. This produces a neat, secure package while limiting the amount of manual work required.
Automatic machines differ from manual systems because they are built for ongoing production. Once the correct settings have been entered, the equipment can maintain steady packaging quality during long production runs.
What Is the Automatic Shrink Wrapping Process?
The exact machinery may vary, but the basic shrink wrapping process is usually similar.
1. Product Feeding
A conveyor automatically carries products into the wrapping equipment.
2. The Product Is Wrapped
The machine places shrink film around the item ready for sealing.
3. The Film Is Sealed
The film is sealed around the product to prepare it for the shrinking stage.
4. Heat Tunnel
The wrapped item travels through a heat tunnel where the film shrinks.
5. The Completed Pack
The packaged item leaves the line ready for handling, delivery or presentation in a retail setting.
Advantages of Automatic Shrink Wrap Machinery
Businesses use automatic shrink wrap machines for several practical reasons.
Increased Output
Automatic machines can package far more products than manual equipment. This makes them suitable for medium- and high-volume production lines.
Repeatable Results
Each item passes through the same controlled wrapping process. This creates a reliable and repeatable pack appearance.
Less Manual Handling
Staff are not required to carry out every stage manually. Employees can then focus on other production duties.
Protection for Stored and Transported Goods
A close film covering helps shield products from dirt, damp conditions and tampering during handling, storage and transport.
Lower Film Waste
Automatic systems can regulate film use more closely than manual wrapping. This can limit wasted material without weakening the seal.
Which Industries Use Automatic Shrink Wrap Machinery?
Automatic shrink wrap machinery is used across many industries because it combines speed with consistent pack quality.
The machinery is often used in:
- Food manufacturing
- Drinks and beverages
- Domestic products
- Printed materials
- Pharmaceutical packaging
- General consumer products
- Industrial components
- Grouped retail packs
The equipment can be configured to wrap single products, promotional bundles and grouped goods.
Should Your Business Upgrade to an Automatic Machine?
Companies often begin with manual or semi-automatic systems before upgrading when output rises.
Signs that it may be time to upgrade include:
- Employees spend a large amount of time wrapping products manually here
- Production volumes are continuing to rise
- Pack consistency varies depending on the operator
- The business needs to increase production without employing additional packaging staff
- The production line requires continuous packaging
Automatic machinery often becomes more efficient as packaging demand increases.
Key Features to Check Before Buying
The right machine depends on the products being wrapped and the requirements of the production line.
Points to check include:
- Production speed
- Maximum product dimensions
- A reliable sealing system
- Compatible shrink films
- Adjustable temperature controls
- Conveyor integration
- Simple operator controls
- Low maintenance requirements
Some systems can also be customised for unusual product dimensions or specialist packaging tasks.
Automatic Versus Semi-Automatic Shrink Wrapping Machinery
With a semi-automatic machine, an operator usually has to place the product or begin one or more stages.
By comparison, automatic machinery completes most parts of the wrapping process by itself. They are therefore more appropriate for high daily packaging volumes.
This can provide faster production, repeatable pack quality and reduced manual work.
What Is the Operating Speed of an Automatic Shrink Wrap Machine?
The number of packs produced per minute depends on product dimensions, equipment settings and the type of wrap required.
Many automatic shrink wrap machines can produce approximately 25 to 40 packs each minute. For suitable products, high-speed side-sealing machines can process more than 100 packs per minute.
Why Choose Kempner for Automatic Shrink Wrap Machines?
Kempner UK has supplied packaging machinery and shrink wrap materials for more than 50 years. The company works with businesses across numerous production environments.
Available equipment includes compact sealers, automatic L-sealers, side-sealing machines and tailored systems.
Kempner also provides commissioning, servicing and technical support. These services are intended to keep packaging equipment working reliably over the long term.
Frequently Asked Questions
Can one machine wrap several product types?
In many cases, yes. Most machines can be adjusted for different product sizes and formats. However, some equipment can be changed over more quickly than others.
Is automatic shrink wrap machinery suitable for small businesses?
Yes, particularly when a smaller company is increasing its output. Investment often becomes worthwhile when manual processes begin limiting daily output.
Do automatic shrink wrap machines reduce packaging costs?
A suitable machine may lower labour requirements, increase output and control material use. The machine must be properly selected for the products and production targets.
Can lower-impact shrink films be used?
Many current machines can use recyclable films, films containing recycled material and certain compostable options. Suitability depends on the application and equipment settings.